Proudly made in America!
Includes five 20 amp switches with switch guards, five 20 amp fuses in front mounted holders, five red LED indicators and a lighted 50 amp starter button. There is a latching cover over the ignition switch and switch guards next to each accessory toggle. No accidental switch actions here. Guards are spaced far enough apart that switch operation is possible even while wearing safety gloves.
The starter switch is wired independently so you can crank the starter without the ignition or fuel being on. How many times do you need to just bump the starter when tuning or setting timing. The ignition switch does control the starter button light.
Each switch is independently wired so you can turn on each accessory separately.
Panel is matte black impact acrylic with white labels. The labels are engraved from the back so they won't rub off or get dirty.
The panel is fully assembled and minimally wired (indicator grounds and fuse to switch). You need to run the ground, power to the switches and the output to your accessories.
Comes with the required connectors for your wiring, instructions, mounting screws and a cutout template.
The stock labels can be changed at no additional cost. It will delay shipping time by one day. Just add what labels you want in the special request box.
Panel dimension 5"H X 9"W
Cutout required 4.5"H X 8"W
OPTIONAL
A pre-wired 70 amp relay can be wired to power all switches. The relay will be controlled by the ignition switch. When you engage the ignition switch it will provide power to all of the other switches. This eases the wiring time by only having one battery power wire to run. Turning off the ignition switch will kill power to all switches at once.
